Einzelheiten
Following the success of their Megane 3 RS it Nitron have now released the long awaited coilover kit for the Megane 2 RS models. This full kit will fit all Megane 2 RS 225, R26 and R26.R variants.
This kit has been in development for the last 2 years and has been tried and tested on Nitron's own Megane R26. This R1 kit has been designed with road and track in mind and is very compliant on the road and incredible on the track, these kits really will transform the way your car handles.
Embraced by racers and race series around the world, NTR R1 kits provide the answer to uncompromising quality, reliability and performance without the need for a remote canister.
A double-acting, single dial offers effortless control over a wide range of damping adjustment; helping to rapidly react and adapt to changing circuit conditions.
- 2-way combined damping control
- 46mm twin front damper pistons
- 40mm single rear damper pistons
- 22mm front piston rods, 14mm rear piston rods
- Camber adjustable using the supplied front adjustable top mounts
- Adjustable dual spring pre-load & ride height
- No remote canister
- 24 click combined adjustment for bump and rebound
- Complete with Nitron springs
The kit comprises four 1-way (double acting) adjustable dampers with Nitron springs. The single adjuster knob affects both bump and rebound together for simple setup and more track-biased use. These shocks have no remote reservoir. All shocks feature adjustable spring platforms to set the ride height whilst maintaining even spring preload (where possible).
This kit includes Nitron's camber and castor adjustable pillow-ball top mounts (where applicable), these eliminate all rubber in the system and so ensure all track inputs are transmitted directly into the damper, maximising wheel control and providing optimum feedback to the driver's finger tips. The adjustable top plates also give the option to increase camber or castor angles for a more track orientated geo setup (for example track day type tyres can permit use of more camber).
Custom spring and valving requirements can be specified.
For the Megane 2RS Nitron recommend the following spring rates;
Road – 60NM or 70NM front / 375lbs rear
Track – 90NM front / 425lbs rear
Full race – 110NM Front / 500lbs rear
Custom specified rates we can go up or down in 10NM
increments on the front and 25lbs on the rear.
