Liqui-Moly Radiator Cleaner 250ml

Liqui-Moly Radiator Cleaner 250ml

 Plus de moyens de paiement

Liqui-Moly Radiator Cleaner 250ml

Liqui-Moly
Regular price £12.37
 Plus de moyens de paiement
Détails
Deposits in the cooling/heating system create blockages for heat exchange and they also block thermostat valves and control mechanisms. When engine temperatures are too high, the engine runs uneconomically and suffers excessive wear at considerable risk of damage. LIQUI MOLY Radiator Cleaner removes deposits containing oil and lime, and ensures that the engine runs reliably and at the optimum temperature. Does not contain aggressive acids or alkalis.
For all coolant and heating systems in water-cooled engines. 250 ml is sufficient for 10 l of coolant (dosage 1:33). Compatible with all conventional coolant additives and antifreezes (with the exception of “low conductivity” coolants).
Please note- Additives & fluids are used at own risk.  

Application

Add contents to the cooling water. Then start up the heater and, depending on the level of contamination, let the engine run at operating temperature for 10 – 30 min. After finishing cleaning, drain the coolant/cleaner mixture, thoroughly flush the cooling system with water and refill it according to the manufacturer’s instructions. The content (250 ml) is sufficient for 10 l of coolant (dosage 1:33).

  • removes oil and greasy residue
  • chemical conversion of lime
  • does not contain acids or alkali
  • compatible with antifreeze
  • neutral behavior on rubber and plastics
  • neutralizes acids
  • disperses sludge

 

Data Sheet- https://pim.liqui-moly.de/pdf/en_GB/liqui/49/P000197

Share

Share on Facebook Tweet Pin it
This website uses cookies to ensure you get the best experience on our website.
×