Detalles
Powerflex Hyundai i30N PD 2016> Suspension Bushes.
POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best.
Front Wishbone Front Bush
Made from Black 95A Durometer Polyurethane, this bush adds stiffness and durability improving stability and wheel control during cornering.
Front Wishbone Front Bush Camber Adjustable
Made from Black 95A Durometer Polyurethane with a CNC-machined stainless steel offset sleeve, this bush adds stiffness and durability improving stability and wheel control during cornering, and allows for +/-0.5° of Camber adjustment for dialling in your wheel geometry. Fitting this bush may result in a small amount of caster change, so fitting PFF26-102G Front Wishbone Rear Bush Caster Adjust is recommended to neutralise or improve any caster change.
Front Wishbone Rear Bush
Using a steel outer shell and a Black 95A Durometer bush with a tapered bore, this bush reduces fore and aft movement of the wheel under acceleration and braking and reduces dynamic castor change during cornering, whilst allowing free articulation of the suspension arm.
Front Wishbone Rear Bush Anti-Lift & Caster Adjust
Designed around a unique on-car adjustable Nylon/Polyurethane ball-joint combination for more direct steering input and improved cornering and braking. The offset bore allows for +/- 0.75° of caster adjustment with a supplied spanner to assist the fine-tuning of the car’s wheel geometry. Optional washers are included to add anti-lift geometry, improving front wheel grip under acceleration. Fitting this bush may result in a small amount of camber change, so fitting PFF26-101G Front Wishbone Front Bush Camber Adjustable is recommended to neutralise or improve any camber change.
Rear Lower Front Control Arm Bush
Using a steel outer shell and our Black 95A Durometer polyurethane, this bush ensures long-lasting performance and control over toe geometry of the rear wheels. Includes steel fitting tools to support the pressed-steel arm during bush fitting. Does not fit the welded tubular arm fitted to fastback models.
Rear Lower Rear Control Arm Bush
Using a steel outer shell and our Black 95A Durometer polyurethane, this bush ensures long-lasting performance and control over rear wheel geometry. Includes steel fitting tools to support the pressed-steel arm during bush fitting.
Rear Anti Roll Bar Bush 15mm / 22.5mm / 23.2mm
Made from Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
Rear Upper Control Arm Bush
Using a steel outer shell and Black 95A Durometer polyurethane, this bush ensures long-lasting performance and control over rear wheel geometry. Includes steel fitting tools to support the pressed-steel arm during bush fitting.
Rear Upper Control Arm Bush Camber Adjustable
Using a steel outer shell, Black 95A Durometer polyurethane and a CNC machined stainless offset sleeve, this bush ensures long-lasting performance and control over rear wheel geometry. Each offset sleeve allows for +/-0.75° camber change on the rear wheels for dialling in your wheel geometry. Includes steel fitting tools to support the pressed-steel arm during bush fitting.
Rear Trailing Arm Bush
Using a composite design with stainless steel, and all Black 95A Durometer polyurethane; this bush improves stiffness and durability over the factory rubber bush for sharper turn-in and more precise rear axle control.
Rear Anti Roll Bar Drop Link Bush
Made from Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes.
Rear Upper and Lower Spring Isolator Pads
Designed to work with the OE spring as well as accept aftermarket springs, they are made from Black 95A durometer material to ensure they outlast the original rubber part equivalent without over-compressing, making them a must for your shopping list when renewing or upgrading your suspension.
Lower Torque Mount - Motorsport
PFF26-122-12BLK Lower Torque Mount - Motorsport uses Black 95A material for all bush components to maximise mount stiffness, resulting in a mega 1300% increase over the stock mount for uncompromising powertrain control for serious track and motorsports use. With its unique dual-sleeve fastening setup for reduced twist of the mount, this really is the next level upgrade for those looking for ultimate engine stability.
Lower Torque Mount Small Bush 14mm
Replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. Ideal when fitted alongside PFF26-120.
Upper Engine Mount Bush Limiter
An easy-to-fit upgrade to limit movement within the upper engine mount, this Black 95A Durometer insert simply fits into the voiding on the top of the mount and is secured in place with the original bolt. Reduced powertrain movement will result in sharper throttle response and reduced wheel-hop, making for an even more engaging and sporty driving experience.
