Powerflex Hyundai i20N / i30N / Kona N / Veloster N Black Series Suspension Bushes
Details
Powerflex Hyundai i20N & i30N Suspension Bushes.
POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best.
FRONT ANTI ROLL BAR BUSH
Made from Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
LOWER TORQUE MOUNT BUSH
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned vehicles.
LOWER TORQUE MOUNT BUSH - FAST ROAD/TRACK
PFF26-120P replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. The Purple 80A material makes for a more spirited drive better suited to fast road/track use. A slight increase in NVH should be expected but improved control of wheel spin/hop is achieved.
UPPER GEARBOX MOUNT BUSH INSERT
An easy-to-fit upgrade to limit movement within the upper gearbox mount, this Purple 80A Durometer insert simply fits into the voiding within the mount and is secured in place with an included steel plate. Reduced powertrain movement will result in sharper throttle response and reduced wheel-hop, making for an even more engaging and sporty driving experience.
OEM Part Number: 21830 S0000 / 21830 S0100
OEM Part Number: 21830 F2000 / 21830 G4100
OEM Part Number: 21830 J3000 / 21830-CO000 / 21830CO000
GEAR SHIFT CABLE BUSH KIT
To replace the small rubber bushes at the end of the gear linkages, these bushes are made from our Purple 80A Durometer polyurethane to give a stiff and precise gear-change.
Powerflex Hyundai i20N / i30N / Kona N / Veloster N Black Series Suspension Bushes
Details
Powerflex Hyundai i20N & i30N Suspension Bushes.
POWERFLEX Black Series bushes are manufactured using our Black 95 Shore A compound to provide maximum control of chassis geometry. They are designed for the Track, ready to Race and are engineered to be the best.
FRONT ANTI ROLL BAR BUSH
Made from Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti roll bar diameter before ordering.
LOWER TORQUE MOUNT BUSH
PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct transition of power to the road, it is suitable for standard and mildly tuned vehicles.
LOWER TORQUE MOUNT BUSH - FAST ROAD/TRACK
PFF26-120P replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. The Purple 80A material makes for a more spirited drive better suited to fast road/track use. A slight increase in NVH should be expected but improved control of wheel spin/hop is achieved.
UPPER GEARBOX MOUNT BUSH INSERT
An easy-to-fit upgrade to limit movement within the upper gearbox mount, this Purple 80A Durometer insert simply fits into the voiding within the mount and is secured in place with an included steel plate. Reduced powertrain movement will result in sharper throttle response and reduced wheel-hop, making for an even more engaging and sporty driving experience.
OEM Part Number: 21830 S0000 / 21830 S0100
OEM Part Number: 21830 F2000 / 21830 G4100
OEM Part Number: 21830 J3000 / 21830-CO000 / 21830CO000
GEAR SHIFT CABLE BUSH KIT
To replace the small rubber bushes at the end of the gear linkages, these bushes are made from our Purple 80A Durometer polyurethane to give a stiff and precise gear-change.
